* Large opening. Reach all the way inside! Easy to remove SCOBY, Easy to clean!
* 3.96 Gallon (15 Liter) filled to the brim Capacity
* Does not scratch easily so it won't hold odor or break down over time like plastic
* Plastic lid provides an airtight seal but has a removable cap that can be replaced with an airlock to release pressure during fermentation
stainless steel spigot (grade 304)
2 piece infuser
for fermenting helps contain fruits and spices in easy to remove piece
for serving keeps beverage cold without watering down.
note the lid of the infuser is larger than the opening of the glass and the screw on cap can not be screwed on but may be placed over the infuser to cover the contents.
SIZE 16 3/ High x base 111 inches.
PLEASE NOTE: This is regular glass not tempered. Glass breaks. Glass is FRAGILE. The filled glass container weights about 40 pounds. Pulling, dragging, lifting the container by the spigot will damage the glass. Do Not Over-Tighten the nut on the spigot. There are two silicon washers provided. Place one on the inside and one on the outside. Point the smaller beveled end into the hole. We are not responsible for glass breaking. Use ONLY room temperature liquid. Clean with white distilled vinegar, and check for leaks BEFORE using . We ship INSURED please check for damage immediately upon delivery.
Free PDF Download Kombucha Craft Brewing Guide Beer, Cider, Mead, Vinegar testing for alcohol, acids, and sugar. Best method to carbonate, and more options available at our sister site www.HappyHerbalist.com
Note: Inspect items for damage and let us know ASAP.
Spigot: Check for leaks prior to adding beverage.
With the jar filled only 1/2 way with tap water hand tighten only. Over-tightening may cause the glass to crack. Again be careful not to over-tighten. .
If it is leaking from the spout. It may be a defective spigot (and we'll send a replacement) or a improperly seated interior gasket. The spigot has a nut on it that may be losses and the gasket may be re-seated or what happened after long use is sediment may be lodge inside and have to be removed.
It may be the silicon gaskets are improperly seated or damaged. If improperly seated simply remove and re-install. If damaged or the size is inapproapite we will send out replacements.
Additional InformationContinuous Brew Guide, Step by Step with pictures
- 15Liter CarboyDisp
- 15 liter Glass Wide Mouth Fermen